Hang Lux kitchen organiser with LED /
-
Undercabinet kitchen system with LED Hang Lux | Description
Hang Lux awarded by Good Design Awards 2020, Archiproducts Design Awards 2020 and New York Product Design Award 2021.
Hang LUX is a suspended kitchen racks system fastened to the cabinet base. Unlike Hang system, each crossbeam is equipped with LED lighting to enlight the worktop. On the upright there is a touch switcher to turn on/off and control light intensity. The structure has a cable with a transformer and a plug.
To keep the structure safe it is necessary that Hang system is wide as much as the cabinet base.
Each module consists of three crossbeams where you can hook the accessories.
The system measures H 42 cm x D 14 cm (shelf included).
-
Technical specs
The structure of the Hang Lux kitchen racks system is made up of aluminum uprights and crosspieces, onto which the accessories are attached and can be positioned as desired. Bear in mind that the lower hooks are not compatible with this structure because in the lower part of the crosspiece the slot is occupied by the LED.
For safety reasons, the side uprights must be fixed to the base of the wall unit in correspondence with the sides, therefore it is necessary that the module chosen matches the width of the wall unit.
The structure is equipped with a cable with transformer and plug to be attached to the light socket.
Hang kitchen orhaniser is 42 cm high and 5 cm deep (without the shelf), D 14 cm (with the shelf).
Shelf Hang /
-
Hang metal shelf
This aluminum shelf is only compatible with the Hang because it has a specific interlocking base for that structure. The shelf is 2,4 cm high and 14 cm deep and should be mounted close to the wall. It is recommended to place it in the two lower crossbars otherwise it becomes unusable.
Available in three lengths: 55/85/115 cm. -
Technical specs
Available in three lengths: 55/85/115 cm. The shelf is 2,4 cm high and 14 cm deep and must be mounted attached to the kitchen backsplash.
Hang Kitchen Roll Holder /
-
Hang kitchen roll holder
This aluminium kitchen roll holder is only compatible with Hang kitchen racks system because it has to be connected to the horizontal bars of the structure.
L 28,5 cm, H 10,5 cm, P 8,3 cm. -
Technical specs
The roll holder compatible with the Hang and Hang Top undercabinet system measures: L 28.5 cm x H 10.5 cm x D 8.3 cm
Knife block /
-
Portacoltelli in legno Hang | Descrizione
This knife block is only compatible with Hang kitchen racks system. The knife block consists is made of aluminum for the hanging part and wooden for the rest (beech finishing).
-
Technical specs
Knife block compatible with the Hang and Hang Top undercabinet structure. Composed of a metal attachment available in black or titanium and a part in beech wood. Measurements: L 25 cm, H 20.4 cm, W 5,3 cm.
Choppig board /
-
Hang chopping board
This chopping board is only compatible with the structure Hang. The chopping board is made of wood (beech finishing)with an aluminum hook.
-
Technical specs
The Hang kitchen chopping board measures: L 30 cm, H 20.4 cm, D 4.8 cm. The finish refers to the metal attachment that allows you to place the chopping board on the Hang or Hang Top structure.
Lower Hang hooks /
-
Hang collection kitchen hooks
Set of three metal hooks to be placed on the lower part of the crossbeam.
Compatible only with Hang and Hang Top kitchen racks systems, but not with the Hang and Hang Top Lux. -
Technical specs
Set of kitchen hooks compatible with Hang and Hang Top, but not with the LED versions because they must be hooked to the lower part of the crosspiece where the LED is normally also positioned. Each hook measures: L 1 x W 3,2 x H 1,2 cm